GATE 2019 ANALYSIS
GATE 2019 Paper Analysis
GATE 2019 Paper Analysis- GATE 2019 Aspirants can take help of GATE previous year paper analysis for preparation. This will help them in knowing important topics and difficulty level of the paper. Last year GATE was conducted for 23 paper codes, Petroleum Engineering was the new entrant . In all papers Engineering Mathematics and General Aptitude section were common. Paper code ME, EC, EE, CE and CS questions were comparatively difficult than other paper codes. More than 1 lakh candidates appeared for these streams.
So, competition level particularly for these streams is quite high. Candidates can check GATE 2017 and 2016 paper analysis for all the major streams. All important topics along with their weightage and level of difficulty is provided below.
GATE 2017 for Mechanical Engineering was already conducted on February 4, 2017. Candidates can check out the GATE 2017 ME analysis. We will update analysis for all the paper codes as after the exam wil be conducted.
Mechanical Engineering (ME) Paper Analysis
Mechanical Engineering paper was conducted on February 4, 2017 in 2 sessions. The number of conceptual questions were more than calculation based questions. Also, 1 mark questions were quite easy to attempt. The number of questions, the marks they carry and the level of difficulty from each section is mentioned below:
| Section | 1 Mark | 2 Mark | No.of Ques |
|---|---|---|---|
| Engineering Mathematics | 5 | 4 | 9 |
| Engineering Mechanics | 0 | 2 | 2 |
| Strength of Materials | 5 | 4 | 9 |
| Design of Machine Elements | 0 | 1 | 1 |
| Theory of Machines | 1 | 2 | 3 |
| Vibrations | 0 | 1 | 1 |
| Fluid mechanics | 4 | 3 | 7 |
| Thermal Science | 5 | 4 | 9 |
| Heat Transfer | 1 | 1 | 2 |
| Manufacturing Science | 4 | 6 | 10 |
| Industrial Engineering | 0 | 2 | 2 |
| Verbal Ability | 3 | 2 | 5 |
| Numerical Ability | 2 | 3 | 5 |
GATE 2016 Mechanical Engineering (ME) Paper
Mechanical Engineering paper was conducted on January 30, 2016 and January 31, 2016 in 3 sessions.The number of conceptual questions were more than calculation based questions. Also, 1 mark questions were quite easy to attempt. The number of questions, the marks they carry and the level of difficulty from each section is mentioned below:
| Topic | Number of Questions | Marks | Difficulty Level |
|---|---|---|---|
| Engineering Mechanics | 4 | 6 | Moderate |
| Mechanics of Material | 7 | 11 | Tough |
| Theory of Machine | 5 | 8 | Easy |
| Machine Design | 2 | 3 | Easy |
| Fluid Mechanics | 6 | 9 | Moderate |
| Heat Transfer | 4 | 7 | Easy |
| Thermodynamics | 7 | 11 | Tough |
| Manufacturing Engineering | 8 | 11 | Tough |
| Industrial Engineering | 2 | 4 | Moderate |
| Mathematics | 10 | 15 | Moderate |
| General Aptitude | 10 | 15 | Easy |
| Total | 65 | 100 | Moderate |
Analysis
- Questions aimed at testing mathematical skills of the candidate were a 17% of the total questions asked
- General Aptitude section had a total of 10 questions carrying 15 marks. 50% of the questions carried 1 mark each and the remaining 5 questions carried 2 marks each
- The questions in Thermodynamics, Manufacturing Engineering and Mechanics of Materials were difficult as compared to other sections
- Mathematics was also easier than the previous year
- Fluid Mechanics section carried 9marks and was not easy to crack
- Few questions were asked from the new syllabus
- Paper wasn’t difficult for the candidates who prepared well for the GATE 2016 exam
Note : The final result declared will be based on the normalised score, keeping in mind the overall difficulty level of paper held in each session.
Know More GATE 2017 Preparation
GATE 2015 Mechanical Engineering (ME) Paper
The paper comprised of 30 questions, carrying 1 mark each and 35 questions, carrying 2 marks each. The break-up of questions from each topic is given below.
| Topic | Number of Question | Marks |
|---|---|---|
| Engineering Mechanics | 4 | 6 |
| Mechanics of Material | 5 | 7 |
| Theory of Machine | 2 | 3 |
| Machine Design | 2 | 4 |
| Fluid Mechanics | 8 | 13 |
| Vibrations | 3 | 5 |
| Heat Transfer | 1 | 2 |
| Manufacturing Engineering | 7 | 11 |
| Industrial Engineering | 6 | 9 |
| Thermal Science | 7 | 10 |
| Mathematics | 10 | 15 |
| General Aptitude | 10 | 15 |
| Total | 65 | 100 |
Analysis
- Maximum number of questions were asked from Fluid Mechanics topic, i.e., 8 questions
- 7 questions each from Manufacturing Engineering and Thermal Science topic
- Only one question was asked from the Heat Transfer topic
- 2 questions each from Theory of Machine and Machine Design topics were asked
Electronics and Communication Engineering (EC) Paper Analysis
GATE 2016 Electronics and Communication Engineering (EC) Paper
GATE 2016 for Electronics and Communication Engineering was held on January 30, 2016 and January 31, 2016 in 3 sessions. The paper contained 9 sections and a separate section of General Aptitude. The detailed break up of the questions of all the sections is given below
| Topic | Number of Question | Marks | Difficulty Level |
|---|---|---|---|
| Networks | 7 | 10 | Easy |
| Control Systems | 5 | 8 | Easy |
| Signal And Systems | 3 | 5 | Easy |
| Digital and Micro Processor | 5 | 8 | Moderate |
| Analog Circuits | 7 | 11 | Tough |
| Communication Systems | 7 | 10 | Tough |
| EDC | 5 | 9 | Moderate |
| EMT | 8 | 12 | Moderate |
| Engineering Mathematics | 8 | 12 | Moderate |
| General Awareness | 10 | 15 | Easy |
| Total | 65 | 100 | Moderate |
Analysis
- Overall, the paper was of moderate difficulty level
- Questions asked from Networks, Control Systems and Signal and Systems were easy
- Questions asked from Digital and Micro Processor, EDC and EMT were of moderate level of difficulty
- Questions asked from Analog Circuits and Communication Systems were comparatively difficult
- Engineering Mathematics was of moderate level of difficulty
- The General Aptitude section was relatively easy
Note: The analysis provided above is for the exam that was conducted on January 31, 2016 from 9 AM to 12 Noon.The final result declared will be based on the normalized score, keeping in mind the overall difficulty level of paper held in each session.
GATE 2015 Electronics and Communication Engineering (EC) Paper
There were 30 questions that carried 1 mark and 35 questions that carried 2 marks in the 3hour long GATE 2015 EC Exam. The questions asked were conceptual and straight-forward. Some students felt the questions from EDC were difficult. The break-up of questions from each topic is given below
| Topic | Number of Question | Marks |
|---|---|---|
| Networks | 7 | 10 |
| Control Systems | 7 | 11 |
| Signal And Systems | 5 | 8 |
| Digital and Micro Processor | 6 | 9 |
| Analog Circuits | 6 | 10 |
| Communication Systems | 6 | 10 |
| EDC | 4 | 6 |
| EMT | 6 | 10 |
| Engineering Mathematics | 8 | 11 |
| General Awareness | 10 | 15 |
| Total | 65 | 100 |
Analysis
- 7 questions each were asked from Networks and Control System topics
- 6 questions each were asked from Digitaland Micro Processor, Analog Circuit, Communication Systems and EMT topics
- Overall, the paper was balanced and a good number of questions were asked from each subject
- Only 8 questions were asked from Engineering Mathematics
Read More About GATE 2017 Topper Tips by Anand
Instrumentation Engineering (IN) Paper Analysis
GATE 2016 Instrumentation Engineering (IN) Paper
GATE 2016 for Instrumentation Engineering was held on January 31, 2016 .Exam was divided into 10sections and a section for General Aptitude. There were 30 questions carrying 1 mark and 35 questions carrying 2 marks. The detailed break up of questions in all the sections is given below.
| Topic | Number of Question | Marks | Difficulty Level |
|---|---|---|---|
| Networks | 7 | 10 | Easy |
| Control Systems | 4 | 7 | Easy |
| Signal And Systems | 5 | 8 | Easy |
| Digital and Micro Processor | 7 | 11 | Moderate |
| Analog Circuits | 6 | 10 | Tough |
| Communication Systems | 4 | 6 | Tough |
| Transducer | 5 | 7 | Moderate |
| Measurements | 5 | 8 | Moderate |
| Optical Instrumentation | 4 | 6 | Moderate |
| Engineering Mathematics | 8 | 12 | Moderate |
| General Awareness | 10 | 15 | Easy |
| Total | 65 | 100 | Moderate |
Analysis
- Overall, the questions were of moderate difficulty level
- Questions asked from Networks, Control Systems and Signal and systems were easy to solve
- Questions related to Digital and Micro Processor, Transducer, Measurements and Optical Instrumentation were of moderate level of difficulty
- Analog circuits and Communication Systems were of difficult level
- Engineering Mathematics was of moderate difficulty level
- The General Aptitude section was easy
Know More GATE 2017 Topper Aman’s interview
Note: The analysis provided above is for the exam that was conducted on January 31, 2016 from 2 PM to 5 PM. The final result declared will be based on the normalised score.
GATE 2015 Instrumentation Engineering (IN) Paper
The exam was held in one session only. Out of a total of 65 questions, there were 30 questions that carried 1 mark and 35 questions carrying 2 marks. Paper was balanced and of moderate level of difficulty. Number of numericals were more as compared to last year, thus more giving more importance to calculations. The break-up of questions from each topic is given below.
| Topic | Number of Question | Marks |
|---|---|---|
| Networks | 9 | 14 |
| Control Systems | 4 | 7 |
| Signal And Systems | 7 | 12 |
| Digital and Micro Processor | 6 | 9 |
| Analog Circuits | 6 | 11 |
| Communication Systems | 2 | 3 |
| Transducer | 7 | 9 |
| Measurements | 5 | 7 |
| Optical Instrumentation | 3 | 5 |
| Biomedical Instrumentation | 1 | 1 |
| Engineering Mathematics | 5 | 7 |
| General Aptitude | 10 | 15 |
| Total | 65 | 100 |
Analysis
- Maximum questions, that is, 9 questions were from Network topic
- 7 questions each were from Transducers and Signal and Systems topics
- 6 questions were from Digital and Micro Processor and Analog Circuits topics
- Only 1 question came from Biomedical Engineering topic
Electrical Engineering (EE) Paper Analysis
GATE 2016 Electrical Engineering (EE) Paper
GATE 2016 for Electrical Engineering was successfully conducted on February 6, 2016 and February 7, 2016 in two sessions. Exam was divided into 11sections and a section of General Aptitude. There were 30questions carrying 1 mark and 35questions carrying 2 marks. The detailed break up of questions from all the sections is given below.
| Topic | Number of Question | Marks | Difficulty Level |
|---|---|---|---|
| Network Theory | 6 | 9 | Moderate |
| Control Systems | 7 | 11 | Moderate |
| Signal And Systems | 3 | 5 | Moderate |
| Digital Electronics | 4 | 7 | Moderate |
| Analog Circuits | 4 | 5 | Moderate |
| EMT | 3 | 4 | Moderate |
| Electrical Machines | 3 | 4 | Moderate |
| Measurements | 7 | 11 | Easy |
| Power Systems | 6 | 10 | Moderate |
| Power Electronics | 5 | 9 | Moderate |
| Engineering Mathematics | 7 | 10 | Easy |
| General Aptitude | 10 | 15 | Easy |
| Total | 65 | 100 | Moderate |
Analysis
- Overall, the exam was of moderate level of difficulty
- Questions were set to test the fundamental knowledge and analytical skills of the examinee
- The number of Numerical Answer type questions was comparatively more than the previous years
Note: The analysis provided above is for the exam that was conducted on February 7, 2016 from 9 AM to 12 Noon. The final result declared will be based on the normalised score, keeping in mind the overall difficulty level of paper held in each session.
GATE 2015 Electrical Engineering (EE) Paper
In the GATE 2015 paper, there were 30questions carrying 1mark each while 2 marks questions were 35in number. The paper is served to test the understanding of basic concepts and the subject on whole. About 15questions were theoretical and 20questions were straight forward and concept based Questions in Machines topic were mainly from on DC Machines. Questions from Power system topic were a tough nut to crack and required critical thinking before answering.
The break-up of questions from all the topics is given below
| Topic | Number of Question | Marks |
|---|---|---|
| Network Theory | 6 | 9 |
| Control Systems | 6 | 10 |
| Signal And Systems | 4 | 6 |
| Digital Electronics | 4 | 7 |
| Analog Circuits | 4 | 5 |
| EMT | 4 | 5 |
| Electrical Machines | 7 | 11 |
| Measurements | 3 | 4 |
| Power Systems | 6 | 10 |
| Power Electronics | 5 | 9 |
| Engineering Mathematics | 6 | 9 |
| General Aptitude | 10 | 15 |
| Total | 65 | 100 |
Analysis
- Overall the paper is balanced and a good amount of questions came from each section
- 3 questions were from Measurements topic
- 7 questions were from Electrical Machines topic
Know More GATE 2017 Topper Vikrama’s Interview
Civil Engineering (CE) Paper Analysis
GATE 2016 Civil Engineering (CE) Paper
GATE 2016 for Electrical Engineering was held on February 6, 2016 and February 7, 2016 in two sessions. Exam is divided into 10 sections and a section of General Aptitude. There were 30 questions carrying 1 mark and 35 questions carrying 2 marks. The detailed break up of questions for all the sections is given below
| Topic | Number of Question | Marks |
|---|---|---|
| Mathematics | 8 | 13 |
| Water Resource Engineering | 10 | 16 |
| Environmental Engineering | 4 | 6 |
| RCC | 6 | 8 |
| Steel Structure | 2 | 4 |
| Mechanics | 2 | 3 |
| Structural Analysis | 4 | 6 |
| Geotechnical Engineering | 10 | 15 |
| Transportation | 5 | 8 |
| Surveying | 4 | 6 |
| General Aptitude | 10 | 15 |
| Total | 65 | 100 |
Analysis
- The exam was of moderate difficulty level
- Some questions were particularly time consuming.
- General Aptitude section was quite easy as compared to the previous year
- Mathematics section was of moderate difficulty level. The questions were framed so as to check the basic knowledge and analytical ability of the candidates.
Note: The analysis provided above is for the exam that was conducted on February 7, 2016 from 9 AM to 12 Noon. The final result declared will be based on the normalised score, keeping in mind the overall difficulty level of paper held in each session.
Check your preparation with GATE 2017 Practice Papers
GATE 2015 Civil Engineering (CE) Paper
The paper comprised of 30questions of 1 mark and 35questions of 2marks. Maximum number of questions were asked from Concrete Structures topic. Overall, the paper was balanced as the questions were asked from all the topics. General Aptitude section was easy. Break-up of the questions from each topic is given below.
| Topic | Number of Question | Marks |
|---|---|---|
| Mathematics | 8 | 13 |
| Concrete Structures | 6 | 8 |
| Environmental Engineering | 5 | 7 |
| Soil Mechanics | 5 | 7 |
| Steel Structure | 1 | 2 |
| Mechanics | 4 | 7 |
| Foundation Engineering | 5 | 8 |
| Fluid Mechanics and Hydraulics | 5 | 8 |
| Transportation Engineering | 5 | 8 |
| Hydrology | 2 | 4 |
| Irrigation | 1 | 1 |
| Surveying | 4 | 6 |
| Structural Analysis | 4 | 6 |
| General Aptitude | 10 | 15 |
| Total | 65 | 100 |
Analysis
- 8 questions were from Engineering Mathematics topics
- Only one question each was from Steel Structure and Irrigation topic
Computer Science and Information Technology (CS) Paper Analysis
GATE 2016 Computer Science and Information Technology (CS)
GATE 2016 for Computer Science and Information Technology was held on February 7, 2016 in two sessions. Exam comprises of 11 sections and a section of General Aptitude. There are 30questions carrying 1 mark and 35questions carrying 2 marks each. The detailed break up of questions of all the sections is given below
| Topic | Number of Question | Marks |
|---|---|---|
| DS Algorithm and Programming | 15 | 23 |
| Operating System | 6 | 10 |
| DMGT | 4 | 6 |
| Digital | 4 | 7 |
| Computer Organisation | 3 | 5 |
| DBMS | 3 | 5 |
| Computer Network | 6 | 8 |
| Theory of Computation | 3 | 5 |
| Compiler Design | 1 | 1 |
| Software Engineering | 4 | 6 |
| Mathematics | 6 | 9 |
| General Aptitude | 10 | 15 |
| Total | 65 | 100 |
| GATE Result | GATE Score Calculation | GATE Counselling | GATE IIT Counselling | GATE CCMT Counselling | GATE PSUs Recruitment | GATE Expected Cutoff |
Analysis
- Maximum number of questions covered, were from DS Algorithm and Programming, i.e., 15 questions
- Only 6 questions were from Engineering Mathematics as compared to 15 questions that came last year
- Only 1 question was from Compiler Design topic
- Questions were evenly distributed for other topics
Note: The analysis provided above is for the exam that was conducted on February 7, 2016 from 9 AM to 12 Noon. The final result declared will be based on the normalised score, keeping in mind the overall difficulty level of paper held in each session.
GATE 2015 Computer Science and Information Technology (CS)
There are 30questions carrying 1-mark and 35questions carrying 2-marks. The paper is less difficult as compared to last year. Numerical questions were less in number. No change in pattern was observed. Questions of General Aptitude were relatively easy. There were a total 45MCQs and 20fill in the blanks questions. Break up of questions from each topic is given below
| Topic | Number of Questions | Total Marks | Difficulty Level |
|---|---|---|---|
| Digital Logic | 3 | 5 | Moderate |
| Computer Organisation and Architecture | 2 | 3 | Moderate |
| Theory of Computation | 3 | 5 | Moderate |
| Data Structure and Algorithms | 10 | 14 | Tough |
| Operating System | 6 | 10 | Moderate |
| Computer Design | 3 | 5 | Tough |
| DBMS | 4 | 6 | Moderate |
| Computer Networks | 6 | 8 | Tough |
| Software Engineering and Web Technologies | 3 | 4 | Easy |
| Engineering Mathematics | 15 | 25 | Moderate |
| General Aptitude | 15 | 15 | Easy |
Analysis
- A total of 10 questions were from Data Structure and Algorithms topic
- 15 questions are from Engineering Mathematics topic
- Only 2 questions are from Computer Organisation and Architecture topics
GATE 2017exam will be conducted through online mode under various paper codes as per the schedule. 15% of the total marks are allotted to questions based on general aptitude of a student while the remaining 85% marksare allotted to the questions meant to check the subject knowledge and conceptual understanding of the candidates. For the first time in the history of GATE exam, virtual scientific calculator will be provided to the candidates for their convenience.
The queson papers of all the paper codes comprise of 65 questions carrying 100 marks. Out of the 65 questions, 10 questions of general aptitude carried 15 marks. The remaining 55 questions are from the concerned subject and will carry 85 marks. As per GATE 2017 Exam Pattern, the question paper consists of both objective (MCQ) and subjective (Numerical Answer Questions) questions. MCQ questions have negative marking while Numerical Answer Questions have no negative marking.
In this article, we have tried to provide, the detailed analysis of different papers. Candidates must keep in mind that GATE 2017 Score Card will be valid for duration of 3 years.
Scores Obtained by candidates in GATE 2016
The GATE 2017 Result mentions the scores obtained by the candidates in the examination. The marks obtained by the candidates are calculated using the formula for the normalised marks. The maximum and minimum marks obtained by candidates in GATE 2016 is given in the table below:
| Paper Code | Maximum Marks Obtained | Minimum Marks Obtained |
|---|---|---|
| AE | 82.00 | 19.67 |
| AG | 45.33 | 16.67 |
| AR | 75.67 | 26.00 |
| BT | 64.33 | 18.00 |
| CE | 87.86 | 16.79 |
| CH | 83.00 | 22.00 |
| CS | 85.95 | 16.71 |
| CE | 77.00 | 19.67 |
| CY | 86.27 | 16.73 |
| EC | 88.39 | 16.74 |
| EE | 89.00 | 30.67 |
| EY | 81.00 | 22.00 |
| GG | 84.67 | 21.00 |
| IN | 54.00 | 16.67 |
| MA | 94.66 | 19.77 |
| ME | 66.33 | 22.00 |
| MN | 73.00 | 28.00 |
| PE | 83.00 | 26.67 |
| PH | 79.00 | 24.33 |
| PI | 78.67 | 17.67 |
| TF | 59.67 | 17.67 |
| XE | 78.33 | 18.00 |
| XL | 58.00 | 17.33 |
The number of candidates who registered for GATE 2016 varies with the number of candidates who appeared and qualified for the examination. The statistics of number of registered, appeared and qualified candidates for various papers in GATE 2016 is given in the graphs below.
.jpg)
Comments
Post a Comment